PLASTIK KOVA SU YALITIM BITUM COVER PLUS

BITUM COVER PLUS

Bitumen Based Liquid Membrane

BITUM COVER PLUS is a single component, ready-to-use liquid membrane based on modified bitumen and solvent, used against water and moisture. After the solvent in its structure evaporates, it adheres strongly to the surface it is applied to, creating a water-resistant and super elastic layer.

SUITABLE AREAS FOR USAGE

  • In foundations against ground moisture and leaks
  • In retaining and curtain walls
  • In galleries, drainage and foundation piles
  • In reinforced concrete terrace roofs
  • In balconies, water channels and hidden streams
  • It is used under coating in the insulation of pools against water and moisture
FEATURES
  • After the water in its structure evaporates, it adheres perfectly to the surface on which it is applied, forming an elastic layer that is resistant to water and moisture.
  • Easy to apply.
  • Creates a seamless insulation layer.
  • Since it does not contain flammable or toxic substances, it can be used in closed areas.
  • Since it contains water in its mixture, it provides good adhesion even if the surface is damp.
  • It has permanent elasticity.
  • Trowel application is extremely easy.
  • It is environmentally friendly as it is water-based.
  • It will not break, crack or swell up and lift off the surface.
  • It provides high defensive resistance against corrosion and chemicals.
APPLICATION
  • Bitumen is applied by brush or spraying.
  • It is ready to use and should be applied in at least two coats without diluting.
  • It dries in approximately 4-5 hours depending on weather conditions.
  • It should not be applied in rainy weather or at temperatures lower than +5°C.
STORAGE, PACKAGING, CONSUMPTION
  • It should be stacked up to 3 times in its original packaging.
  • Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
  • It should be stored in a closed area.
  • It should be stored on a pallet and in a dry place between +10°C and +25°C.
  • Punctured, opened and burst buckets should be closed or used immediately.
  • If the specified storage conditions are observed, the storage life is 12 months.
  • 17 kg of liquid is presented ready for use in a plastic bucket.
  • It is produced in black color.
  • Consumption: 1.2-1.5 kg/m2. Consumption rate varies depending on the application technique and absorbency of the surface.
  • A controlled sample is recommended for exact consumption.
  • The specified rates are theoretical standards and may vary depending on the application method and intensity of use.
WARNINGS
  • This product is not suitable for pressure water insulation.
  • Freshly applied material should not be exposed to rain or frost for 24 hours.
  • In applications that will be exposed to sunlight, the thickness should be at least 1 mm.
  • Bitumen Cover Plus should not be applied below +5°C, in rainy and foggy weather.
  • It should not be applied to wet and frozen surfaces.
  • Pay attention to the safety signs and warnings on the packaging.
  • The health and safety information specified in the Product Safety Data Sheet (MSDS) prepared by a certified technical team in accordance with international standards (ECDirective 2001/58/EC) regarding the product must be followed.
  • Adequate ventilation should be provided in workshops, and open flames and high temperatures should be avoided.
  • Stir well before application. Do not leave the lid of the package open.
  • Avoid application in weather conditions where rain is expected or under rain.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below +5°C and above +30°C, do not try to use frozen material by adding water.
DOCUMENTS
Click for document