rootnot-2k

BITUM ROOTNOT 2K

Two-component, Bitumen Polyurethane Based, Liquid Waterproofing Material

BITUM ROOTNOT 2K is a two-component, bitumen polyurethane based, highly elastic, liquid waterproofing material. It is applied cold. It creates a durable insulation layer with the excellent adhesion it provides to different surfaces. It has high resistance to tension, tearing and abrasion. It has a high level of crack bridging ability with its continuously elastic structure.

SUITABLE AREAS FOR USAGE

  • In building foundations
  • In retaining walls
  • In roofs and terraces, green roof terraces
  • Insulation of roof streams and rain gutters
  • Insulation of areas such as bathrooms, kitchens and balconies (under coating)
  • In existing polyurea repairs
  • In light roofs made of metal and fibrous materials
  • Used with the appropriate primer to be selected on concrete, wood and metal surfaces
FEATURES
  • Easy to apply.
  • Creates a seamless insulation layer.
  • Since it does not contain flammable or toxic substances, it can be used in closed areas.
  • Since it contains water in its mixture, it provides good adhesion even if the surface is damp.
  • It has permanent elasticity.
  • Trowel application is extremely easy.
  • Does not require heating or thinning.
  • It is environmentally friendly as it is water-based.
  • It will not break, crack or swell up and lift off the surface.
  • It provides high defensive resistance against corrosion and chemicals.
APPLICATION
  • The powder component in the bucket is poured into the liquid component and mixed with a low speed mixer until no lumps remain.
  • After mixing, it is applied with trowel, roller, brush or spray.
  • It dries in approximately 1-2 hours depending on weather conditions.
  • Application can be made on damp but not wet surfaces.
  • It should not be applied in rainy weather or at temperatures lower than (+) 5°C.
  • At least two coats should be applied, and the next coat should not be applied before one coat is completely dry.
STORAGE, PACKAGING, CONSUMPTION
  • It should be stacked up to 2 layers in its original packaging.
  • It should be stored in a closed area.
  • Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
  • It should be stored on a pallet and in a dry place between +5°C and +25°C.
  • Punctured, opened and burst buckets should be closed or used immediately.
  • If the specified storage conditions are observed, the storage life is 12 months.
  • BITUM ROOTNOT is presented in a plastic bucket as a set of 24+8=32kg.
  • It is produced in black color.
  • Consumption: 1.2-1.5 kg/m2. Consumption rate varies depending on the application technique and absorbency of the surface.
  • A controlled sample is recommended for exact consumption.
  • The specified rates are theoretical standards and may vary depending on the application method and intensity of use.
WARNINGS
  • This product is not suitable for pressure water insulation.
  • Freshly applied material should not be exposed to rain or frost for 24 hours.
  • BITUM ROOTNOT should not be applied below (+) 5°C, in rainy and foggy weather.
  • It should not be applied to wet and frozen surfaces.
  • Pay attention to the safety signs and warnings on the packaging.
  • Adequate ventilation should be provided in workshops, and open flames and high temperatures should be avoided.
  • Stir well before application. Do not leave the lid of the package open.
  • Avoid application in weather conditions where rain is expected or under rain.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below +5°C and above +30°C, do not try to use frozen material by adding water.
DOCUMENTS
Click for document