Bitumen Lining

Bitumen Based Liquid Membrane

BITUM LINING is a single component, ready-to-use liquid membrane based on modified bitumen and solvent, used against water and moisture. After the solvent in its structure evaporates, it adheres strongly to the surface it is applied to, creating a water-resistant and super elastic layer.

SUITABLE AREAS FOR USAGE

In foundations against ground moisture and leaks
In retaining and curtain walls
In galleries, drainage and foundation piles
In reinforced concrete terrace roofs
In balconies, water channels and hidden streams
It is used under coating in the insulation of pools against water and moisture

FEATURES

Easy to apply.
Provides better adhesion on moist surfaces.
It does not contain flammable and toxic substances.
It can be easily applied by anyone.
It is environmentally friendly as it is water-based.
It is applied cold. It does not require heating or thinning.
It has high adhesion to the ground.
It will not break, crack or swell up and lift off the surface.
It provides high defensive resistance against corrosion and chemicals.

APPLICATION

Both sides of the joints are taped to prevent primer contamination.
THIOSEAL PREMIER is applied to both sides of the joint with a clean brush and the tapes are removed.
Wait for the primer to dry completely.
Joint depth is limited with PE-based wick or similar.
Then, polysulphide based joint filler is applied.

STORAGE, PACKAGING, CONSUMPTION

It should be stacked up to 3 times in its original packaging.
It should be stored in a closed area.
Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
It should be stored on a pallet and in a dry place between +5°C and +25°C.
Punctured, opened and burst buckets should be closed or used immediately.
If the specified storage conditions are observed, the storage life is 24 months.
Bitumen Lining is presented in a plastic bucket as 16 kg liquid ready for use.
It is produced in black color, please contact our representative for different colors.
Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
It should be stored on a pallet and in a dry place between +10°C and +25°C.
Punctured, opened and burst buckets should be closed or used immediately.
If the specified storage conditions are observed, the storage life is 12 months.

WARNINGS

It is not suitable for use under pressurized water, on glass and glazed surfaces, underground where there is high hydrostatic pressure, or on paint.
Freshly applied material should not be exposed to rain or frost for 24 hours.
CORUPU LINE should not be applied in rainy and foggy weather below (+) 5°C. It should not be applied to wet and frozen surfaces.
Pay attention to the safety signs and warnings on the packaging.
The health and safety information specified in the Product Safety Data Sheet (MSDS) prepared by a certified technical team in accordance with international standards (ECDirective 2001/58/EC) regarding the product must be followed.
Adequate ventilation should be provided in workshops, and open flames and high temperatures should be avoided.
Stir well before application. Do not leave the lid of the package open.
Avoid application in weather conditions where rain is expected or under rain.
It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
Avoid applying at temperatures below (+) 5°C and above (+) 30°C, do not try to use frozen material by adding water to it.

DOCUMENTS

Click for document