PLASTIK BIDON CORUCEM 2K FULL ELASTIC

CORUCEM 2K FULL ELASTIC

Two Component Full Elastic Water Insulation Product

CORUCEM 2K FULL ELASTIC is cement and acrylic based, consisting of powder and liquid connectors, saving its elasticity constantly, high quality water insulation mortar.

SUITABLE AREAS FOR USAGE

  • Indoor and outdoor places
  • In the horizontal and vertical applications
  • In water storage tanks and pools
  • In the insulation of terraces, roofs and balconies
  • In the insulation of the base and concrete wall
  • In the water insulation of the under ceramic
  • In the wet areas (bathroom, WC, shower, kitchen)
PRODUCT SPECIFICATIONS
  • It has abrasion resistance.
  • It provides long-life insulation.
  • It is not affected by water molds and bacteria.
  • It is not affected by UV rays.
  • It is non-toxic and suitable for water tanks.
  • It is enduring to water.
  • It is enduring to water pounding.
  • It has high bonding strength.
  • It is elastic and water vapor permeable.
  • It doesn’t break off, crack and swell.
  • It is applied easily.
  • Its mechanical endurance is high to abrasion and impacts.
  • It is enduring and impermeable to salt water, grease oil and petrol.
  • It can create barriers to moisture by filling the pores on the applied surface.
SURFACE PREPARATION
  • The surface of application should be cured.
  • The surface must be decontaminated from materials preventing sticking such as oil, dirt, dust or paint…
  • The weak parts of the concretes should be fixed and the loose textures should be scratched.
  • The application surfaces should be dry or with little moisture.
  • The surface of the application areas should be clean, dustless, durable
  • Layers decreasing adherence such as oil, grease, dirt, cement slurry, rust, form oil and efflorescence should be cleaned completely before the application.
  • Possible cracks and faults on the surface should be fixed carefully with CORU-RM-THIN repair mortar.
  • After the surface is ready, ground coat is applied.
  • In the places like terraces, corners must be filleted horizontally and vertically at an angle of 45° and corners are made ready for insulation.
APPLICATION
  • Application surfaces are lined as a single lining with CORUNEX SILINAST EXTRA.
  • After the ground coat is applied and 8 hours is waited at the latest, CORUCEM 2K is applied.
  • It is applied as 2 layers with brush, roll and spray to prepared surfaces.
  • Liquid component is discharged into the agitation vessel, and powder component is added to the liquid component slowly.
  • Mixture is mixed with low-speed drill until there isn’t agglomerate, and water isn’t added to the mixture.
  • 5 minutes is waited to get consistency, and then mixture is mixed for 20-30 seconds.
  • It is applied with brush in one direction and it is rub to penetrate to the corners.
  • Before the application of the second layer, vertical corners must be beveled.
  • Each application of the layers must be perpendicular to the previous one, and it must be completed at once.
  • Net application is recommended between the two layers of CORUCEM 2K.
  • Prepared mortar must be used in 30 minutes.
  • Water isn’t added to mixture externally. Powder component is always added to liquid component.
  • 5 hours must be waited between the layers. Drying time may take longer time at low temperature and high humidity. Do not apply the second layer if the first layer is not dry.
PACKAGING AND CONSUMPTION
  • CORUCEM 2K is available in 20KG kraft sack and 10KG plastic can.
  • For exact consumption, controlled sample is recommended
  • The proportions given here are just theoretical and may be changed depending on the application techniques
STORAGE
  • Four times as much piling as can be done in original packaging.
  • Keep in dry and indoor places.
  • Please take necessary precautions against extreme weather conditions, water, humid and frost
  • Keep at temperatures between +10 and +25 Celsius degree and dry places.
  • Faulty bucket or package should be untouched and returned
  • If the warehouse conditions are followed, storage life is 12 months.
WARNINGS
  • New applications must be protected from rain and frost for 24 hours.
  • During the rain and under the possibility of rain, do not apply.
  • Do not apply on the frozen and wet surfaces.
  • Pay attention to safety signs and warnings on the package.
  • Blend well before the process. Do not keep the package open.
  • Avoid any contact with skin, eyes, and mouth and take necessary work safety procedures.
  • Keep under enough air conditioning level. Prevent from fire and high temperature.
  • Do not apply at the temperatures under +10°C and above +30 °C and do not use frozen material by adding water.
  • Our company, CORUNEX, takes no responsibility for the consequences of wrong applications which ignore warnings and instructions.
DOCUMENTS
Click for document