WATER-BASED TRANSPARENT INSULATION MATERIAL
A water insulation and primer material that provides excellent water repellency by impregnating the surface it is applied to and creating a transparent barrier against water in the capillary channels.
Suitable Areas of Application
Application can be done with brush, roller or spray gun. CORUIZO should be mixed well before application. Application is done by saturating the surface with the wet-on-wet method without waiting for the first layer to dry. At least two layers should be applied. If a coating material is to be applied on CORUIZO, one day should be waited after the CORUIZO application. If it is to be used in the joints of non-porous surface structural elements such as ceramics, tiles, glass bricks, glass tiles, etc., the joints should be repaired first and the joint fillers should be renewed. WATERDROP is applied to the joints with a fine-tipped brush using the wet-on-wet method. After the process is completed, the material that spills over onto shiny surfaces should be wiped with a wet cloth. Otherwise, a matte appearance will remain. It is not suitable for use on paint, under pressurized water (pool, water tank, etc.) or under soil with high hydrostatic pressures.
Protect from frost. Do not leave the box lid open. Keep out of reach of children. Eyes and skin must be protected when working with all chemicals. Do not expose to direct sunlight and heat. Since this technical sheet has been prepared by taking into account general conditions, please obtain written information for details that are not sufficient above. Otherwise, errors resulting from lack of information do not impose any liability on our company. This technical bulletin supersedes any previous bulletins for this product.