Coruwhite

CORUWHITE is a water insulation product which turns into elastic and impermeable coating when it dries. It is applied in liquid form.

SUITABLE AREAS FOR USAGE:

On the surfaces which is wanted to be waterproof and damp-proof.
On the roofs, on the sides of the chimney and parapet
On the horizontal and vertical surfaces
For the filter insulation
For the insulation of terrace roofs and balconies
In the metal roofs and woods
As a layer of waterproofing in prefabricated concrete, painted sheet, galvanized steel, GRP water streams,
For under-ceramic water insulation and in the wet areas such as bathroom, WC, kitchen etc.

PRODUCT SPECIFICATIONS:

It is applied easily and it is semi-fluid.
It is elastic, applied easily on the hard surfaces.
Provides excellent adhesion to all kinds of building materials.
Saves its elasticity at temperature difference
Resistant to weak chemicals and UV rays.
It provides the possibility of inhaling surfaces due to its micro-porous structure.
Can be colored.
Resistant to water ponding.
It does not break off, crack and swell.
It is durable to acid, petroleum products, water and solvents.
It is not affected by water molds and bacteria.
It is not affected by UV rays.

SURFACE PREPARATION

The application surfaces should be dry or with little moisture.
The surface of the application areas should be clean, dustless, durable
Layers decreasing adherence such as oil, grease, dirt, cement slurry, rust, form oil and efflorescence should be cleaned completely before the application.
Possible cracks and faults on the surface should be fixed carefully with CORU-RM-THIN repair mortar.
In the places like terraces, corners must be filleted horizontally and vertically at an angle of 45° and corners are made ready for insulation.
After the surface is ready, ground coat is applied.
Thesurfacestobeappliedmusthave a slopethat does not allow
According to the condition of the surfaces, CORUWHıTE 100% is thinned with water, then prime.
Free-lime cement mortar

APPLICATION

At the latest 24 hours after ground coat, the CORUWHITE is applied.
CORUFIRM is watered down by %50 and the single layer lining is made.
It is applied with a brush, roller or airless spray to the prepared surfaces as 2 layers.
The application of each floor should be perpendicular to the previous one, it must be completed at once.
In order for the caulking to be healthy, it should be chamfering where it is required in horizontal or vertical parts.
5 to8hoursshouldpassbetween the application of eachDryingtime may be prolonged in lowtemperaturesandhighhumidityenvironments.
If the first layer is not completely dry, do not apply the second layer.
For the perfect caulking, filleting must be done in the needed horizontal and vertical areas.

PACKAGING AND CONSUMPTION

CORUWHITE is available in 10G and 20KG buckets as liquid. Do not thin.
It is produced in grey, yellow and red. For more, contact us.
According to the application technique and the absorber of the surface, the rate of consumption is variable.
For exact consumption, controlled sample is recommended
The proportions given here are just theoretical and may be changed depending on the application techniques.

STORAGE

Three times as much piling as can be done in original packaging.
Keep in dry and indoor places.
Please take necessary precautions against extreme weather conditions, water, humid and frost
Keep in temperatures between +10 and +25 Celsius degree and dry places.
Faulty bucket or package should be untouched and returned
If the warehouse conditions are proper, storage life is 12 months.

WARNINGS

It is not suitable for the insulation of pressure water.
New applications must be protected from rain and frost for 24 hours.
Do not apply in the rainy, foggy and under +10°C.
Do not apply on the frozen and wet surfaces.
Pay attention to safety signs and warnings on the package.
Keep under enough air conditioning level. Prevent from fire and high temperature.
Blend well before the process. Do not keep the package open.
During the rain and under the possibility of rain, do not apply.
Avoid any contact with skin, eyes, and mouth and take necessary work safety procedures.
Do not apply in the temperatures under +10°C and above +30 °C and do not use frozen material by adding water.
Our company, CORUNEX, takes no responsibility for the consequences of wrong applications which ignore warnings and instructions.

DOCUMENTS