Silicopaint Acry
SILICOPAINT ACRY
Pure Acrylic Silicone Exterior Paint
It is a 100% Pure Acrylic emulsion based, breathable, elastic top coat exterior paint with high colour resistance and water repellency, with a silky matt texture.
Areas of Use
It can be applied to plaster, sprinkled plaster, comb mosaic, wiped mosaic, concrete, exposed concrete, betopan, MDF, OSB, mineral-based final layer decorative coatings, final layer silicone decorative coatings, old painted surfaces that have lost their color and can support themselves, and terrace type surfaces.
PRODUCT FEATURES
%100 Saf Akrilik, İpek mat görünümlü, Göz alıcı, parlak renklere sahip, ekstra su itici , nefes alabilen, kolay uygulamaya sahip, Düşük kir tutma eğilimi ,Elastomerik/kılcal çatlakları köprüleyen
SİLİKOPAİNT Saf Akrilik Dış Cephe ürünü %100 saf akrilik yapısı sayesinde dış atmosfer şartlarına dayanıklı olup; uygulandığı yüzeylere daha iyi tutunur, güneş ışınlarına karşı yüksek düzeyde direnç gösterir ve CO2 (karbondioksit) bariyeri oluşturur. Elastik yapısıyla, yüzeydeki 100 µm genişliğe kadar olan kılcal çatlakları kapatma özelliğine sahiptir. SİLİCOPAİNT Saf Akrilik Dış Cephe Boyası uygulandığı yüzeylerde yayılma özelliğinden dolayı kolay sürülür ve boyama işlemi
tamamlandıktan sonra dış cephelerde zarif bir doku oluşturur. Zaman ve
işçilikten tasarruf sağlar.
APPLICATION
The surface to be applied must be solid, dry, clean and in a condition that can support itself. If
there is any dirt, dust, mold oil and loose layers, it must be cleaned. In concrete, exposed concrete
and newly plastered surfaces, the setting time must be waited (28 days), loose plaster particles
must be cleaned from the surface with a scraper or similar methods. If necessary, surface
correction and repairs must be made, and the painting process must be started after the
CORUNEX SILINAST Exterior Primer is applied. The paint application must be at least 2 layers. It
is not recommended to apply between 10.00-16.00 in hot weather. It is recommended not to start
the application from the facade that receives direct sunlight, and to start the application from the
facade that is in the shade for a healthy application. During the application and product drying
period, the ambient and surface temperatures must be between +5°C and +30°C and it must be
protected from all kinds of precipitation, dew and frost Airless Spraying Pressure: 140 bar Nozzle
Angle: 50 °C Nozzle Size (inch): 0.019”-0.021” Dilution: 5% DILUTION It should be diluted with
10% clean water in brush and roller applications, and at most 5% in spraying applications. All
products used should be diluted at the same rate in order to prevent possible color tone
differences.
STORAGE, PACKAGING AND CONSUMPTION
- 15 L, 12.5 L, 2.5 L
- Depending on the type, absorbency and structure of the surface to be applied, an area of 7-12 m2 can be painted with 1 liter in a single coat.
- A controlled sample study should be carried out for exact consumption.
- It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight.
- Close the lid of the packaging immediately after use in an airtight manner.
- It should be stored in a closed area.
- Necessary precautions must be taken against water, humidity, frost and severe weather conditions.-
- It should be stored on a pallet and in a dry place between (+) 10°C and (+)25°C.
- Punctured, opened and burst buckets should be used or closed immediately.
- If the specified storage conditions are observed, the storage life is 12months.
WARNINGS
For details not found sufficient above, please obtain written information. Otherwise, errors resulting from lack of information do not impose any liability on our company. This technical bulletin invalidates previous bulletins related to this product.
DOCUMENT
