_0001_CORU LQ GLASS

CORU-LQ GLASS

New Generation Transformation Polish

It is a new generation single component, water-based protective protector used for protection purposes with excellent adhesion to all surfaces.

Suitable Application Areas:

  • It can be used especially on wall tiles, furniture and low-traffic areas after CORUEVERYTHING Paint application. It is not recommended to be applied in areas exposed to intensive use such as floors, kitchen countertops and parquet.

PRODUCT FEATURES
  • It has excellent water resistance, so it also provides waterproofing on the surface it is applied to.
  • It has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.).
  • Since it spreads very well, it does not leave brush or roller marks and gives the user the desired time for the necessary corrections.
  • It has high adhesion strength.
  • It does not hold dirt or stains and can be cleaned very easily with a wet and soapy cloth.
  • It is resistant to scratches.
  • It dries quickly.
  • It does not have an annoying odor.
APPLICATION
  • The surface to be applied must be absolutely clean. The surface must be free of all dust, dirt, oil and silicone that will reduce the adhesion of the paint to the surface, and sandpaper must be applied when necessary. No primer is required before application. It is recommended to prime the surface with Antirust to prevent corrosion on metal surfaces. After opening the CORU-EVERYTHING package, it is mixed until a homogeneous consistency is achieved. The product is applied to the necessary pre-prepared surface in 2 layers without dilution, using a silk brush, velvet varnish roller or spraying. A minimum of 2 hours must be waited between layers. During application, care must be taken to ensure that the applied surface and ambient temperature are between +5°C and +30°C.
STORAGE, PACKAGING, CONSUMPTION
  • Packaging 250 / 500 ml Plastic
  • With 1 litre, an area of 16 – 18 m² can be painted in two coats, depending on the application method and the surface.
WARNINGS
  • Avoid application in weather conditions where rain is expected or under rain.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below +5°C and above +35°C, and do not try to use frozen material by adding water.
Doküman
Click for product document...