Global Astar
MS POLYMER PRIMER (GLOBAL PRIMER)
Acrylic Polymer-Based Primer
MS POLYMER PRIMER is an acrylic polymer resin-based primer used before waterproofing, applied without dilution depending on the surface condition.
Suitable Areas of Application
- Large, detailed, flat, and sloped roofs
- Terrace and balcony edges and drip lines
- Channels, gutters, chimney edges, eaves, and drains for easy water insulation
- Adapts to all types of surfaces without creating joints
- Can be used on concrete, aerated concrete, plaster, raw walls, and similar surfaces, as well as on old lime-washed and emulsion-based painted interior and exterior surfaces
- Compatible with cement; can be mixed with cement and diluted for use
FEATURES
It penetrates the surface very well. It prepares a solid base and bonds
the final coat of paint to the surface, reduces paint consumption, and
reduces the water absorbency of plasters. It is also a primer with very
high adhesion performance in water-based waterproofing materials
and wall putty applications.
APPLICATION
Before application, swollen, loose and unhealthy looking surfaces should be
scraped, oil and dirt should be wiped clean. If salt continues to appear on the
surface, application should not be done until the reasons for this are
eliminated.
GLOBAL PRIMER is mixed thoroughly until it becomes homogeneous before use and diluted with 7 times the volume of water, thoroughly absorbed into the surface with a brush, spray or roller and applied in a single coat. The application of paint or insulation product should be started after the primer has dried for at least 4 hours.
GLOBAL PRIMER is mixed thoroughly until it becomes homogeneous before use and diluted with 7 times the volume of water, thoroughly absorbed into the surface with a brush, spray or roller and applied in a single coat. The application of paint or insulation product should be started after the primer has dried for at least 4 hours.
PACKAGING AND CONSUMPTION
It is offered for sale in 10 kg plastic drums with liquid consistency.
• Depending on the application technique and the absorbency of the surface, a
consumption of 0.100 kg - 0.200 kg/m2 is recommended, so as not to form a film on the
concrete surface.
• It is produced in transparent color. It can be diluted with water.
• Before application, the surface must be cleaned of dirt, rust and oil.
• In order for the mixture to be homogeneous, the mortar must be mixed thoroughly with a
mixer.
• It varies depending on the application technique and the absorbency of the surface.
• It is compatible with cement and can be applied as a grout by mixing with cement.
WARNINGS
Wear protective glasses during the painting process.
If the dye comes into contact with your eyes, rinse your eyes with plenty of water and
consult a doctor immediately.
Ensure ventilation of your environment during painting and drying.
•Keep the paint can closed and away from children.
Protect the paint from frost and excessive heat.
Do not pour the remaining paint into the sink or toilet.
Clean your brush and roller with water after each application.
Be sure to carry the paint can safely and store it upright.
DOCUMENT
