Bitumen Plus
BITUMEN PLUS
Single component %1000 Elastic Bitumen Based Liquid Membrane
BITUMEN PLUS is a single component, ready-to-use liquid membrane based on modified bitumen and solvent, used against water and moisture. After the solvent in its structure evaporates, it adheres strongly to the surface it is applied to, creating a water-resistant and super elastic layer.
Suitable Areas of Application
- In foundations against ground moisture and leaks
- In retaining and curtain walls
- In galleries, drainage and foundation piles
- In reinforced concrete terrace roofs
- In balconies, water channels and hidden streams
- It is used under coating in the insulation of pools against water and moisture
FEATURES
- BASIS : Modified Bitumen
- SOLVENT : Solvent
- COLOR : Black CONSISTENCE : Thick Liquid
- DENSITY : 0.98 g/cm³
- SOFTENING TEMPERATURE : +86°C
- APPLICATION TEMPERATURE : Between +5°C and +35°C
- APPLICATION METHOD : By brush, rake or spraying
- SOLID CONTENT RATIO : %65
- ELASTIC INITIAL DRYING : 2 hours
- FINAL DRYING : 4 hours
- TEST DRYING : 48 hours
APPLICATION
The application surface must be dry and clean, the surface must be cleaned of
dust, dirt, rust and oil and loose parts must be scraped off. Areas that are
prone to cracking such as sharp ends and horizontal/vertical joints must be
rounded by beveling. Large pores and cracks must be filled with JOINT
FILLER.
BITUMEN PLUS is applied only to the side of the application area that is in contact with water. It is a ready-made material. It does not require heating or thinning. It can be applied with brush, roller, rake or pressureless sprayers. Although BITUMEN PLUS dries in a short time of approximately 2 hours, in cases where multiple layers are to be applied, one day should be waited between layers. In cases where it is required to withstand higher pressures, excellent results can be achieved by reinforcing it with carriers such as fiberglass, felt, mesh, and insulation cloth.
BITUMEN PLUS is applied only to the side of the application area that is in contact with water. It is a ready-made material. It does not require heating or thinning. It can be applied with brush, roller, rake or pressureless sprayers. Although BITUMEN PLUS dries in a short time of approximately 2 hours, in cases where multiple layers are to be applied, one day should be waited between layers. In cases where it is required to withstand higher pressures, excellent results can be achieved by reinforcing it with carriers such as fiberglass, felt, mesh, and insulation cloth.
STORAGE, PACKAGING AND CONSUMPTION
- It should be applied in at least two layers, with 600 g/m² in each layer.
- 16 kg metal box.
- It should be protected from adverse weather conditions.
- It should be stored in a dry, cool, closed environment (+10 o C and +25 oC).
- The opened and mixed product should be consumed immediately.
- It has a shelf life of 12 months in its unopened packaging, in dry places at a minimum temperature of +5 ºC.
DOCUMENT
