APPLICATION
The surface to be applied must be dry and clean, the surface must be cleaned
of dust, dirt, rust and oil, and loose parts must be scraped off.
BITUMEN PLUS is applied only to the side of the application area that is
in contact with water. It is a ready-made material. It does not require
heating or thinning. It can be applied with brush, roller, rake or non
pressurized sprayers. Although BITUMEN ANTI ROOT dries in a short
time of approximately 2 hours, in cases where multiple layers are to be
applied, one day should be waited between layers. In cases where it is
required to withstand higher pressures, excellent results can be achieved
by reinforcing it with carriers such as fiberglass, felt, mesh, and
insulation cloth.