KUCUK METAL KOVA CORU PUCOAT 2

CORU PUCOAT II

Double Component Polyurethane Based Water Insulation Material

A two-component polyurethane based water insulation and coating material based on Polyurethane Acrylic that does not mix with drinking water and can be used in closed areas.

Suitable Areas of Application

  • It has been developed especially for the insulation of metal or concrete water tanks. It can be used on concrete, marble, plaster, stone, wood and metal surfaces.
  • It is used for water insulation on concrete or ceramic covered terraces provided that a UV resistant top coat is applied on top.
  • It is used in the production of water impermeable coating resistant to light vehicle and pedestrian traffic.
  • Since it is solvent-free, it can be used safely even in closed areas.
  • Since it does not mix with drinking water, it can be used safely.
  • It has the properties of water insulation, corrosion protection, friction, impact and resistance to some chemicals.
  • It has high adherence to the applied surface.
  • It is not harmful to health during application and use.
  • It is resistant to aging.
FEATURES
  • It has waterproofing, corrosion protection, friction, impact and some chemical resistance properties. Since it is solvent-free, it can be used safely even in closed areas.
  • It has high adherence to the surface it is applied to.
  • It is not harmful to human health and does not mix with drinking water.
APPLICATION
  • After mixing component A for approximately 2-3 minutes, all of component B is added to component A and mixed with a low speed drill (100-500 rpm) for 3 minutes.
  • The mixture should be used within 30-45 minutes, otherwise irreversible gelation will begin.
  • Application should be done in at least two coats and 6 hours should be waited between coats.
  • If the waiting period exceeds 24 hours, the second coat should be applied after the first coat is sanded.
  • The application area should be protected from water for at least 6-8 hours.
  • It is applied with a brush or roller.
  • In storage areas, a minimum of 7 days should be waited for the material to fully cure.
  • In floor covering applications, dry sand should be added to CORUPUCOAT II.
  • The application temperature should be between +5°C and +30°C.
STORAGE, PACKAGING, CONSUMPTION

It can be stored for a minimum of 8 months in unopened packaging at 35°C. It should be protected from frost. It should be applied in at least two layers, with 0.600 kg/m2 for each layer.

WARNINGS
  • CORUPUCOAT II should be protected from frost while in its packaging.
  • Do not leave the box lid open. (S7) Do not expose to direct sunlight and heat. (S3/15)
  • Keep out of reach of children. (S2)
  • Eyes and skin should be protected when working with all chemicals. (S24/25)
DOCUMENT
Click for product document...