Coru-Anti Fire

It is an acrylic resin based, non-flammable, matte looking interior and exterior fire paint thanks to its specially developed formulation.

Suitable Areas of Application

It can be used on old painted surfaces that have been previously painted and lost their color.
It can be used on plaster surfaces.
It can be applied on lime surfaces.
It can be used on briquette surfaces.
It can be applied on Ytong surfaces.
It can be used on chipboard and wooden surfaces.
It can be used on concrete, wooden and steel structures.
It can be used safely on roofs.
It can be applied on fire escapes.
It can be used in military facilities.
It can be applied on chimneys.
It can be used in all places where fireproofing is required such as schools, nurseries and hospitals.
It is an ideal paint for interior and exterior surfaces

FEATURES

It has excellent covering ability.
Its color does not fade, crack, swell or flake.
With its UV-resistant colors, it provides extraordinary protection against the harmful effects of UV rays in sunlight.
It is resistant to atmospheric conditions and pollution, sunlight, friction and impacts.
Thanks to its high spreading power on the surface, it is easy to apply and saves time and labor.
It gives a matte appearance to surfaces with its carefully selected colors and high quality.
It does not have an annoying odor during application.
It has high level flame retardancy properties.
It does not retain dirt and preserves its properties like the first day for many years.
It does not contain solvent, it is water based.
It is elastic and is not affected by movements

APPLICATION

The surfaces on which Fire Paint will be applied must be clean and dry, free from all dirt, oil, dust and old paint residues.
During application, care should be taken to ensure that the surface and ambient temperature is between +5°C minimum and +30°C maximum.
Before application, ANTI-FIRE - Fire Paint is diluted by 50% and applied as a primer.
Applications are made at 4 hour intervals.
It is applied in a single layer with a brush or roller, ensuring complete and equal penetration into the surface.
To prevent waviness on large surfaces, the material should always be diluted with the same amount of water, mixed thoroughly and applied to the surface without interruption.
There should be no excessive wind and air current in the application environment.
NOTE: Dilution (by volume) Ready to use. Dilute with water if necessary.
Drying Time (20°C) Initial Drying Time: 15 minutes Second Coat Application: 2 hours Final
Drying: 24 hours Paintable Area 2 - 3 m² of area can be painted with 1 kilogram in two coats, depending on the surface, material thickness and the desired fire retardant resistance time.

STORAGE, PACKAGING, CONSUMPTION

DOCUMENT