Bitum Rootnot 2K C
BITUM ROOTNOT 2K C
Two Component Root Impermeable Liquid Membrane
BITUM ROOTNOT II C is two component water insulation product which is modified with root barrier polymer and bitumen, formulized as an against water and humidity, used for the water insulation of the basement tanking, curtain walls and terraces.
SUITABLE AREAS FOR USAGE
- In horizontal and vertical usage
- In the water insulation of the building foundations.
- In the insulation of the curtain walls and supporting walls
- In the insulation of the terraces, garden terraces and balconies.
- In the insulation of the wet areas, underground and ground surfaces.
PRODUCT SPECIFICATIONS
- It is applied easily.
- It creates jointless insulation layer.
- It can be used in closed areas due to the fact that it doesn’t consist toxic and burnable materials.
- Even the surface is humid, BITUM ROOTNOT II C provides high bonding due to that it consists water.
- It has permanent-elasticity.
- It can be applied with a trowel.
- It is eco-friendly due to that it is water based.
- It doesn’t break off, crack and swell.
- It is enduring to chemicals and corrosions
- It is root barrier.
SURFACE PREPARATION
- The surface of the application areas should be clean, dustless, durable
- Layers decreasing adherence such as oil, grease, dirt, cement slurry, rust, form oil and efflorescence should be cleaned completely before the application.
- Possible cracks and faults on the surface should be fixed carefully with CORU-RM-THIN repair mortar.
- After the surface is ready, lining is applied.
- BITUM LINING is applied cold and single layer.
APPLICATION
- The powder component in the bucket is poured into the liquid component and mixed with a low speed mixer until no lump remains.
- After the mixing, it is applied with trowel, roll, brush and spray.
- Depending on the weather condition, it dries in approximately 1-2 hours.
- It can be applied on the surfaces with humid but it shouldn’t be applied on the wet surfaces.
- Do not apply in rainy weather conditions or under +5°C.
- It must be applied as at least 2 layers and the second layer must be applied after the first layer is dry.
PACKAGING AND CONSUMPTION
- BITUM ROOTNOT II K is available in 22KG and 8KG plastic buckets.
- It is produced in black color.
- Consumption is 1,2-1,5kg/m2.
- For exact consumption, controlled sample is recommended
- The proportions given here are just theoretical and may be changed depending on the application techniques.
STORAGE
- Three times as much piling as can be done in original packaging.
- Keep in dry and indoor places.
- Please take necessary precautions against extreme weather conditions, water, humid and frost
- Keep in temperatures between +5 and +25 Celsius degree and dry places.
- Faulty bucket or package should be untouched and returned
- If the warehouse conditions are followed, storage life is 12 months.
WARNINGS
- It isn’t suitable for the insulation of pressure water.
- New applications must be protected from rain and frost for 24 hours.
- In the applications exposed to sun rays, the thickness must be at least 1mm.
- Do not apply in the rainy, foggy and under +5°C.
- Do not apply on the frozen and wet surfaces.
- Pay attention to safety signs and warnings on the package.
- Comply with the health and safety regulation forms indicated in MSDS which have been prepared by the certified technicians and International standards for the product (EC-Directive 2001/58/EC).
- Keep under enough air conditioning level. Prevent from fire and high temperature.
- Blend well before the process. Do not keep the package open.
- During the rain and under the possibility of rain, do not apply.
- Avoid any contact with skin, eyes, and mouth and take necessary work safety procedures.
- Do not apply in the temperatures under +5°C and above +30 °C and do not use frozen material by adding water.
- Our company, CORUNEX, takes no responsibility for the consequences of wrong applications which ignore warnings and instructions.
DOCUMENTS
