PLASTIK KOVA ASTAR CORUPREMIER 1_7 LINING

CORUPREMIER 1 / 7 PRIMER

Interior Conversion Primer

It is a highly developed acrylic-based primer that can deeply penetrate into cement, plaster and lime surfaces on exterior and interior facades.

SUITABLE AREAS FOR USAGE

  • Exterior and interior spaces, vertical and ceilings
  • Low-quality absorbent surfaces that have lost their plaster and lime whitewash properties
  • Very absorbent or dusty surfaces
  • Used on surfaces with high absorbency
PRODUCT FEATURES
  • When dry, it gains a transparent appearance, prevents the absorbency of the plaster surface and ensures the integration of the paint with the surface.
  • Thanks to its spreading feature, it penetrates the surface quickly.
  • Provides high economy in paint consumption.
  • It ensures that the paint applied on it preserves its liveliness and color.
  • It integrates with the surface thanks to its high strength.
  • It is resistant to severe climatic conditions.
  • It prevents possible micro cracks that may occur on the surface.
  • It is easy to apply.
  • It prevents rapid water loss in cement and gypsum based plasters.
  • If applied correctly, it will not cause shedding or frizz.
  • It prevents water and moisture permeability to a large extent.
APPLICATION
  • It is diluted 1/7 with water.
  • CORUPREMIER 1/7 clear primer is applied in a single coat by roller, brush or spray.
  • To ensure deep penetration, it is recommended to apply by saturating the material on the surface.
  • In order to maintain the homogeneity of the primer, it should be mixed at intervals during the work.
  • Paint application can be started at least 5 hours after applying CORUPREMIER 1/7 transparent primer.
  • During application, care must be taken to ensure that the surface and ambient temperature is between a minimum of (+) 5°C and a maximum of (+) 30°C.
STORAGE, PACKAGING, CONSUMPTION
  • It should be stacked up to 3 times in its original packaging.
  • It should be stored in a closed area.
  • Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
  • It should be stored on a pallet and in a dry place between +10°C and +25°C.
  • Punctured, opened and burst buckets should be closed or used immediately.
  • If the specified storage conditions are observed, the storage life is 12 months.
  • The packaging box in the 15 kg bucket is white and becomes transparent when dry.
  • The consumption rate is 0.1 - 0.8 kg/m2 depending on the application technique and the absorbency of the surface.
  • A controlled sample is recommended for exact consumption.
  • The specified rates are theoretical standards and may vary depending on the application method and intensity of use.
WARNINGS
  • The recommended dilution rate should be applied and adhered to.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below +5°C and above +35°C, and do not try to use frozen material by adding water.
DOCUMENTS
Click for document