PLASTIK KOVA ASTAR SILINAST INTERIOR & EXTERIOR LINING

SILINAST PRIMER

Silicone Exterior and Interior Pre-Painting Primer

Acrylic resin based, pigmented, high adhesion (sticking) power, exterior and interior paint primer.

SUITABLE AREAS FOR USAGE

  • In the final coat before painting on exterior facades
  • In horizontal and vertical applications
  • On mineral based, highly absorbent surfaces
  • Before first paint applications
  • In repainting old painted surfaces
  • Applied on highly absorbent or dusty surfaces.
PRODUCT FEATURES
  • Thanks to its breathability feature, it allows the moisture inside the structure to escape.
  • Thanks to its spreading feature, it penetrates the surface quickly.
  • Provides high economy in paint consumption.
  • Provides adhesion and balances the bond between the paint and the structure.
  • It ensures that the paint applied on it preserves its liveliness and color.
  • It integrates with the surface thanks to its high strength.
  • It is resistant to severe climatic conditions.
  • It prevents possible micro cracks that may occur on the surface.
  • It is easy to apply.
  • Prevents rapid water loss on mineral-based surfaces.
  • If applied correctly, it will not cause shedding or frizz.
  • It prevents water and moisture permeability to a large extent.
APPLICATION
  • It is diluted with water at a rate of 10%.
  • SILINAST is applied in a single coat by roller, brush or spraying.
  • To ensure deep penetration, it is recommended to apply by saturating the material on the surface.
  • In order to maintain the homogeneity of the primer, it should be mixed at intervals during the work.
  • Paint application can be started at least 6 hours after the primer is applied.
  • During application, care must be taken to ensure that the surface and ambient temperature is between a minimum of (+) 5°C and a maximum of (+) 30°C.
STORAGE, PACKAGING, CONSUMPTION
  • It should be stacked up to 3 times in its original packaging.
  • It should be stored in a closed area.
  • Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
  • It should be stored on a pallet and in a dry place between +10°C and +25°C.
  • Punctured, opened and burst buckets should be closed or used immediately.
  • If the specified storage conditions are observed, the storage life is 12 months.
  • SILINAST is offered in different packaging forms and is offered in 10kg and 20kg buckets.
  • The packaging box is white and becomes transparent when dry.
  • Depending on the application technique and the absorbency of the surface; the consumption rate is 10 kg/m2. A controlled sample is recommended for exact consumption.
  • The specified rates are theoretical standards and may vary depending on the application method and intensity of use.
WARNINGS
  • The recommended dilution rate should be applied and adhered to.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below +5°C and above +35°C, and do not try to use frozen material by adding water.
DOCUMENTS
Click for document