PLASTIK BIDON SILINAST EXTRA LINING

SILINAST EXTRA

General Purpose Primer

It is a single component acrylic resin based, high adhesion and strength absorbent surface developed for ready-to-use general purpose primer agent

SUITABLE AREAS FOR USAGE

  • Indoors and outdoors
  • Horizontal and vertical surfaces
  • Porous concrete, fiber plates, absorbent and dusty surfaces
  • Pre-application agent for bonding ceramic, tile etc. applications to plasterboard or similar surfaces
  • Surfaces with high water absorption value (such as gas concrete, brick)
  • It can be used on surfaces with high absorbency.
PRODUCT FEATURES
  • It is easy to apply.
  • It is resistant to water, frost and severe weather conditions.
  • Its adhesion performance and strength are very high.
  • Prevents dust formation.
  • It penetrates deeply.
  • Does not contain solvent.
  • It is permeable to water vapor.
  • It can be applied to damp surfaces.
  • It integrates with the surface thanks to its high strength.
APPLICATION
  • The surface must be free from foreign substances such as dust, oil, paint, etc. that may prevent adhesion.
  • If the application is to be done in a closed area, ventilation should be done.
  • If there is old solvent paint on the surface to be applied, it must be cleaned before application.
  • Ready-to-use SILINAST EXTRA in 10 kg liquid form must be shaken before use.
  • After the shaking process, the amount of SILINAST EXTRA to be used is poured into a clean container and made ready for use.
  • SILINAST EXTRA, which is ready to use in liquid form, is applied directly to the surface to be applied using a roller or brush.
  • It is applied by thoroughly rubbing it in equal amounts on the entire surface. SILINAST EXTRA primer agent should be applied 1 day before any concrete, screed, repair and coating applications.
  • It is recommended to apply in two layers.
STORAGE, PACKAGING, CONSUMPTION
  • It should be stacked up to 3 times in its original packaging.
  • It should be stored in a closed area.
  • Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
  • It should be stored on a pallet and in a dry place between +10°C and +25°C.
  • Punctured, opened and burst buckets should be closed or used immediately.
  • If the specified storage conditions are observed, the storage life is 12 months.
  • SILINAST EXTRA is available in 10 kg plastic drums, ready to use in liquid form, and cannot be diluted.
  • Depending on the application technique and the absorbency of the surface; consumption rate is 0.100-0.150 kg/m2
  • A controlled sample is recommended for exact consumption.
  • The specified rates are theoretical standards and may vary depending on the application method and intensity of use.
WARNINGS
  • Avoid application in weather conditions where rain is expected or under rain.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below +5°C and above +35°C, and do not try to use frozen material by adding water.
DOCUMENTS
Click for document