PLASTIK BIDON CORU ACK-100

 CORU ACK 100

 Strength Enhancing Agent for Concrete and Precast

An acrylic polymer emulsion-based additive used in concrete and precast production. It is a multi-purpose, non-saponifying, alkali-resistant, set-retarding, strength-enhancing, and binding agent, ready for use in cementitious mortars.

Suitable Application Areas:

  • Enhances alkali resistance in concrete and precast production,
  • Increases the strength of concrete and precast elements,
  • Strengthens repair mortars, plasters, and wear-resistant coatings,
  • Used in screeds, ceramic adhesives, and thermal insulation mortars for strength enhancement and as a set retarder,
  • A perfect acrylic polymer-based mortar additive for all cement-based mortars where high adhesion strength is required.
FEATURES
  • It creates an elastic coating on large surfaces.
  • Does not shrink or crack.
  • Provides high adherence.
  • Reduces shrinkage.
  • It increases the strength of mortar, plaster and screed.
  • Protects the reinforcement against corrosion.
  • It is resistant to many chemicals and mineral oils.
  • It is ready to use and can be diluted with water.
  • It is a white colored curing material.
APPLICATION
  • The binder (cement-micro silica-fly ash) and aggregate should be mixed until a homogeneous mixture is obtained. After adding 80% of the water to be added to the mixture, ACK 100 should be added to the mixture with the remaining water. ACK 100 should be mixed for 60 seconds or for the time determined in laboratory tests, in order to distribute it homogeneously in the mixture (up to 3% of the cement ratio).
STORAGE, PACKAGING, CONSUMPTION
  • 30 kg drum, 230 kg barrel, 1000 kg IBC tank, Bulk