Coru MS Polymer

Polymer-Based Rigid Elastic Waterproofing Product

CORU MS POLYMER; a polymer-based, single-component waterproofing product, forms an impermeable waterproofing layer by drying on the surfaces it is applied to

SUITABLE AREAS FOR USAGE

In the insulation of terrace roofs and balconies
In the insulation of curtains and for membrane repairs
On the bitumen surfaces which have insulation problems
On the asphalts and concrete floors
For under-ceramic water insulation and in the wet areas such as bathroom, WC, kitchen etc.
As a layer of waterproofing in prefabricated concrete, painted sheet, galvanized steel, GRP water streams,
Can be used on external fronts.

PRODUCT SPECIFICATIONS

High adhesion to the ground.
It does not break off, crack and swell.
It is applied easily.
It is ready to use. Do not thin.
It is enduring to chemicals and corrosions
It gives the surface a bright appearance.
It is durable to acid, petroleum products, water and solvents.
It has a high mechanical strength against abrasion and impacts.
It is not affected by water molds and bacteria.
It is enduring and impermeable to salt water, grease oil and petrol.
It is not affected by UV rays.
It can create barriers to moisture by filling the pores on the applied surface.

SURFACE PREPARATION BEFORE APPLICATION

The application surfaces should be dry or with little moisture.
The surface of the application areas should be clean, dustless, durable
Layers decreasing adherence such as oil, grease, dirt, cement slurry, rust, form oil and efflorescence should be cleaned completely before the application.
In the places like a terrace, corners must be filleted horizontally and vertically at an angle of 45° and corners are made ready for insulation.
After the surface is ready, ground coat is applied.

APPLICATION

CORU MS is watered down by %50 and the single layer ground coat is made.
At the latest 8 hours after ground coat, the CORU MS Polymer is applied.
It is applied with a brush or roller to the prepared surfaces as 2 layers.
The application of each floor should be perpendicular to the previous one, it must be completed at once.
In order for the caulking to be healthy, it should be chamfering where it is required in horizontal or vertical parts.
5 to10hoursshouldpassbetween the application of eachDryingtime may be prolonged in lowtemperaturesandhighhumidityenvironments.

PACKAGING AND CONSUMPTION

CORU MS is available in 10G and 18KG buckets as liquid. Do not thin.
It is produced in grey, white, tile red and RAL colors.
According to the application technique and the absorber of the surface, the rate of consumption is variable.
For exact consumption, controlled sample is recommended
The proportions given here are just theoretical and may be changed depending on the application techniques.

STORAGE

Four times as much piling as can be done in original packaging.
Keep in dry and indoor places.
Please take necessary precautions against extreme weather conditions, water, humid and frost
Keep in temperatures between +10 and +25 Celsius degree and dry places.
Faulty bucket or package should be untouched and returned
If the warehouse conditions are proper, storage life is 24 months.

WARNINGS

Do not apply on the frozen and wet surfaces.
Pay attention to safety signs and warnings on the package.
Keep under enough air conditioning level. Prevent from fire and high temperature.
Blend well before the process. Do not keep the package open.
During the rain and under the possibility of rain, do not apply.
Avoid any contact with skin, eyes, and mouth and take necessary work safety procedures.
Do not apply in the temperatures under +10°C and above +30 °C and do not use frozen material by adding water.
Our company, CORUNEX, takes no responsibility for the consequences of wrong applications which ignore warnings and instructions.

DOCUMENTS

Click for document