KRAFT TORBA CORUCRYSTAL ENG

CORUCRYSTAL PLUS

Cement Based Applied in the Form of Base Coat Crystalized Water Insulation Product

Cement based, applied in the form of base coat to the foundation before the concrete is poured, reacting with water in the poured concrete and crystalized chemicals in the cement, rendering the concrete to waterproof by filling the capillary breaks, crystalized, water insulation product.

SUITABLE AREAS FOR USAGE

  • On the lean concrete before the base coat
PRODUCT SPECIFICATIONS
  • CORUCRYSTAL PLUS is reactive, it repairs the capillary cracks up to 0,5 mm in the foundation concrete in the process of time.
  • It saves the reinforcement from the assault of aggressive chloride ions; by using water, it moves forward in the concrete thanks to diffusion and prevents rusting.
  • By penetrating Sulphate ions into the strength concrete, it prevents the occurrences of sizable and big molecules and prevents the cracks in the concrete.
  • Thanks to its special formula, it extends the longevity and strength of the concrete.
  • Thanks to its inorganic chemical structure, it doesn’t reduce the level of the compressive strength of the concrete. Its influence continues through the longevity of the concrete.
  • Concreting can be done in the waterproofing of the sub-base course, it can be used in all air conditions.
  • It isn’t affected by UV rays and oxidization.
SURFACE PREPARATION
  • Lean concrete must be applied and oil, dirt, rust, grease must be cleaned on the blinding concrete before the application.
  • Formwork and iron must be floored on the lean concrete.
APPLICATION
  • After the formwork and iron are floored on the building and before the concreting, CORUCRYSTAL PLUS is sprinkled with the system of dry-shake from the iron construction to the base with the consumption of 3kg/m2.
  • For the controlled consumption, one sack of CORUCRYSTAL is put on the decorative profiles (4m+2m, 8m2 area) which is made on the iron and it is sprinkled into the area.
  • As concreting is done, the chemical reaction starts and sub-base insulation is completed.
PACKAGING AND CONSUMPTION
  • CORUCRYSTAL is available in 25KG kraft sack. (3kg/m2)
  • For exact consumption, controlled sample is recommended
  • It is oxide-red.
STORAGE
  • Eight times as much piling as can be done in original packaging.
  • Keep in dry and indoor places.
  • Please take necessary precautions against extreme weather conditions, water, humid and frost
  • Keep in temperatures between +10 and +25 Celsius degree and dry places.
  • Faulty bucket or package should be untouched and returned
  • If the warehouse conditions are followed, storage life is 12 months.
WARNINGS
  • New applications must be protected from rain and frost for 24 hours.
  • During the rain and under the possibility of rain, do not apply CORUCRYSTAL.
  • Do not apply on the frozen and wet surfaces.
  • Pay attention to safety signs and warnings on the package.
  • Blend CORUCRYSTAL well before the process. Do not keep the package open.
  • Avoid any contact with skin, eyes, and mouth and take necessary work safety procedures.
  • Keep under enough air conditioning level. Prevent from fire and high temperature.
  • Do not apply in the temperatures under +10°C and above +30 °C and do not use frozen material by adding water.
  • Our company, CORUNEX, takes no responsibility for the consequences of wrong applications which ignore warnings and instructions.
DOCUMENTS
Click for document