BUYUK METAL KOVA CORUPUR

CORUPUR

Polyurethane Based UV Resistant Water Insulation Product

A polyurethane based, single component, liquid, ready to use, highly UV resistant, walkable water insulation and coating material.

Suitable Areas of Application

  • Horizontal terraces of buildings, roofs, balconies, parking lots,
  • Also in wet area insulation,
  • In rain gutters, channels and canals, terrace roofs,
  • In protection of polyurethane foam applications,
  • In water tanks, cold storages, wet areas,
  • In swimming pools, it is used safely against water and humidity.
  • It is also applied as a water insulation material in renovations of old water insulation coatings.
FEATURES
  • It is resistant to pedestrian traffic with its mechanical resistance.
  • It is resistant to plant roots.
  • It does not soften in summer and does not harden in winter.
  • It is resistant to harsh weather conditions and chemicals.
  • It has high adherence.
  • It adheres perfectly even to old coatings.
  • It is elastic and does not crack.
  • It can be easily applied with airless spray or roller.
  • It is resistant to water and chemical materials.
  • It penetrates the surfaces very well.
  • It is in liquid form, ready to use.
APPLICATION
  • It is a ready-made material and does not require heating or thinning.
  • The material should be applied after it is mixed very well.
  • Gloves should definitely be used during application.
  • It is applied by spraying, brush or roller.
  • Final curing occurs in 5 days.
  • At least two coats must be applied.
  • The second coat should be applied after at least 12 hours.
  • It should not be applied in rainy weather or at temperatures lower than (+) 5°C.
STORAGE, PACKAGING, CONSUMPTION
  • It should be stacked up to 8 times in its original packaging.
  • It should be stored in a closed area.
  • Necessary precautions must be taken against water, humidity, frost and severe weather conditions.
  • It should be stored on a pallet and in a dry place between +10°C and +25°C.
  • Punctured, opened and burst buckets should be closed or used immediately.
  • If the specified storage conditions are observed, the storage life is 12 months.
  • CORUPUR is offered ready to use as a liquid in a 25 kg bucket.
  • It is produced in grey color.
  • Consult your representative for different colors.
  • Consumption: 1.2-1.7 kg/m2. Consumption rate varies depending on the application technique and absorbency of the surface.
  • A controlled sample is recommended for exact consumption.
  • The specified rates are theoretical standards and may vary depending on the application method and intensity of use.
WARNINGS
  • Freshly applied material should not be exposed to rain or frost for 24 hours.
  • CORUPUR should not be applied in rainy and foggy weather below (+) 5°С.
  • It should not be applied to wet and frozen surfaces.
  • Pay attention to the safety signs and warnings on the packaging.
  • The health and safety information specified in the Product Safety Data Sheet (MSDS) prepared by a certified technical team in accordance with international standards (ECDirective 2001/58/EC) regarding the product must be followed.
  • Adequate ventilation should be provided in workshops, and open flames and high temperatures should be avoided.
  • Mix well before application.
  • Do not leave the lid of the packaging open.
  • Avoid application in weather conditions where rain is expected or under rain.
  • It should not be brought into contact with skin, eyes and mouth, and the application should be carried out by taking the necessary work safety precautions.
  • Avoid applying at temperatures below (+) 5°C and above (+) 30°C, do not try to use frozen material by adding water to it.
DOCUMENT
Click for product document...