Corusilox
CORUSILOX
TRANSPARENT WATERPROOFING AND SURFACE IMPREGNATING MATERIAL
CORUSILOX is a solvent and silane-siloxane based surface impregnation and primer material that penetrates the surface it is applied to, creates a transparent barrier against water in capillary channels and provides excellent water repellency. It does not affect the water vapor permeability of the surface and thus does not prevent the surface from breathing
Suitable Areas of Application
The surface to be applied must definitely have a strong flow slope. It is used on all kinds of concrete surfaces, mineral plasters, highly absorbent surfaces such as aerated concrete, brick, tile, mineral-based natural and artificial stones, mineral based painted surfaces, monuments, statues and historical structures made with these materials. It can be used as a primer before painting on surfaces. When used on non-porous or glazed surfaces such as metal, glass, glass tile, glass mosaic, ceramic, etc., the liquid that overflows outside the joint should be wiped with a damp cloth before it dries. It is not suitable for use under pressurized water or under soil where there is high hydrostatic pressure or on paint.
- It is an invisible material that does not form a film on the surface.
- It is the ideal material for surfaces where the appearance is not desired to change.
- Provides rapid water repellency; makes the surface self-washable.
- It penetrates the surfaces very well.
- It is in liquid form, ready to use.
- Dries without leaving any stickiness.
- Does not form a layer on the surface.
- It is permeable to water vapor; it does not prevent the surface from breathing.
- It prevents the formation of mold, fungus and moss on the surface by preventing moisture, which creates an ideal environment for the reproduction of microorganisms.
- It is resistant to alkaline environments.
- It prevents the walls from getting wet; therefore, it also provides heat savings. (5% humidity in a material reduces the heat insulation value of this material by 30%.)
- It prevents water from entering the building material and prevents frost damage caused by the expansion of this water during freezing and thawing.
- UV resistance is excellent.
Application can be done with brush, roller or spray gun. CORUSILOX should be mixed thoroughly before application. Application is done by saturating the surface with the wet-on-wet method without waiting for the first layer to dry. At least two layers should be applied.
- Shelf life is at least 12 months from the date of manufacture in its unopened original packaging.
- 16 kg metal fleas
- 4 kg metal lice
- 200-600 gr/m2 per application depending on the absorbency of the surface
- Since it contains flammable materials, smoking, lighting of fire and use of spark-producing devices (fans etc.) are prohibited during application (S16). Since it emits toxic gas until it dries, when it is used in closed areas or in areas with low air circulation, forced ventilation should be provided and health precautions should be taken (S38/23). Do not leave the box lid open (S7). Keep out of reach of children(S2). Eyes and skin must be protected when working with all chemicals (S24/25). Do not expose to direct sunlight and heat (S3/15).
- Since this technical sheet has been prepared by taking into account general conditions, please obtain written information for details that are not sufficient above. Otherwise, errors resulting from lack of information do not impose any liability on our company. This technical bulletin invalidates previous bulletins related to this product.
